flexpress – the print professional’s choice

Trade Print. Done Properly.
Good Business. Done Responsibly.

From luxury business cards to beautiful books, we deliver premium print at competitive prices, with fast turnaround and free UK delivery. Trusted by print professionals nationwide for exceptional quality and innovative ways to make print matter more.

Exclusively for the trade

Specialist online printing for resellers, publishers, designers, agencies and professional print buyers.

Welcome to Flexpress Insights

You’re getting an early look at part of our new Flexpress website, launching soon. In the meantime, explore our latest thinking on print, automation, manufacturing and responsible business.

Manufacturing Efficiency7 min read

The fastest machine in the factory isn’t always the answer

Why we judge efficiency by how quickly a job gets through the whole factory, not by how fast one press can print.

Read article →
Succession Planning7 min read

The hardest job I’ve had at Flexpress: making myself less important

What succession planning has taught us about trapped knowledge, letting go of decisions and handing over a culture.

Read article →
Trade Print Automation7 min read

Automation isn’t about losing people

Automate the routine, escalate the unusual: how automation gives our people time back for work that needs judgement.

Read article →
Modern Print Business7 min read

We stopped trying to be a one-stop print shop

Why we chose to specialise, and how focusing on the right print makes standardisation, automation and investment clearer.

Read article →
Responsible Print6 min read

The greenest sheet of paper is the one you don’t waste

Why cutting waste in the process matters as much as the paper you choose, and how efficiency and responsibility go hand in hand.

Read article →

No articles in this topic yet.

  1. Insights
  2. Autumn 2026 Newsletter
  3. The fastest machine in the factory isn’t always the answer
Manufacturing EfficiencyNewsletter

The fastest machine in the factory isn’t always the answer

Why we judge efficiency by how quickly a job gets through the whole factory, not by how fast one press can print.

Steve WenlockAutumn 2026 Newsletter7 min read
Photo: Bank Phrom / Unsplash

We’re currently preparing for one of the biggest production investments in Flexpress history: the installation of our new Ryobi 970 PF-8. It’s an impressive machine and will print both sides of a sheet simultaneously, dramatically increase our litho capacity, and give us significantly more production capability than we have today.

So, you might imagine that our biggest manufacturing question is: How quickly can we print?

But, increasingly, it isn’t. The more interesting question is: How quickly can we get a job all the way through the factory?

Whilst those two things sound similar, they’re actually very different because a printing press doesn’t manufacture a finished job.

Imagine a job that takes thirty minutes to print. On paper, making the printing press twice as fast sounds like a huge productivity improvement. But suppose that job then waits for two hours before it can be folded. Or sits overnight waiting for a perfect binder. Or needs a member of staff to manually move information from one system into another before the next process can begin.

Halving the printing time from thirty minutes to fifteen minutes has made almost no difference to the customer. Yes, the press has become more productive, but the factory hasn’t.

That distinction is one of the most important lessons we’ve learned about manufacturing.

Every factory has a constraint

One of the books that had a significant influence on my thinking is Eliyahu Goldratt’s The Goal.

At the heart of the book is a deceptively simple idea: every manufacturing system has a constraint.

Something, somewhere, ultimately determines how much the whole system can produce.

If your printing department can produce 100 jobs per day but your finishing department can only process 60, then your factory isn’t really capable of producing 100 finished jobs per day. It’s capable of producing 60.

The additional 40 simply become work in progress. They wait. And waiting is one of the least productive activities in any factory.

This sounds obvious when written down, but in reality, businesses can spend enormous sums improving parts of a process that aren’t actually restricting output:

  • A machine becomes 20% faster.
  • A department becomes more efficient.
  • An operator shaves a few minutes from a task.

All worthwhile improvements perhaps, but if the real constraint is somewhere else, overall throughput may barely change. The bottleneck moves, and there’s another complication. If you successfully remove one bottleneck, another one appears!

That isn’t failure. It’s progress. For example: suppose finishing is limiting production and you double finishing capacity. Wonderful. But now printing might become the constraint. Increase printing capacity and next, perhaps guillotining becomes the problem. Solve that and it could become packing, or estimating, or administration. Or the speed at which customer artwork can be checked and approved.

The constraint simply moves.

For us, that has changed the way we think about investment. Rather than asking: “Which machine would we like to make faster?”, we increasingly ask: “What is preventing more completed work from leaving the factory?”

This produces some very different answers.

Why finishing matters so much

Printing naturally attracts attention. Printing presses are large, expensive and technically impressive, but commercially, finishing can be every bit as important. A beautifully printed sheet isn’t much use to a customer who ordered a finished booklet. This lesson has shaped a lot of our investment at Flexpress.

Several years ago, for example, we were heavily dependent on our Horizon Stitchliner for booklet production. It was a good machine and enormously important to the business; in fact, probably too important.

As volumes grew, we realised that relying on a single booklet-making line created both a capacity problem and a resilience problem, so we began looking for a second system. Initially, we considered buying used equipment.

The thinking was understandable: it was supposed to be the backup machine, but I was given some good advice. The prediction was essentially: if we added the capacity, we would probably end up using it – and that’s exactly what happened!

So, we bought a new Duplo system, and within around 18 months it had gone from being additional capacity to something we would struggle to operate without. It now runs extremely hard.

The experience taught us something important: that sometimes what looks like spare capacity today becomes tomorrow’s production requirement.

Capacity without flow can create a bigger problem

This is particularly relevant as we prepare for the Ryobi 970. The new press will give us substantially more litho capacity, which is fantastic. But if we simply celebrate the printing capacity and ignore everything that happens afterwards, we risk moving the queue from one place to another.

In fact, faster equipment can sometimes expose weaknesses elsewhere much more quickly.

Imagine opening a motorway from two lanes to six lanes, but leaving the exit road at one lane.

You haven’t necessarily solved congestion. You may simply have moved it.

Manufacturing works in much the same way. The objective, therefore, isn’t maximum utilisation of every individual machine. It is maximum useful flow through the entire system.

A machine standing still isn’t always a problem

This can feel counterintuitive because traditional manufacturing thinking often says that an expensive machine should always be running. After all, if you’ve paid for it, surely every idle minute is wasted?

Not necessarily. If a non-constrained machine produces more work than the next operation can handle, keeping it running simply creates more work in progress.

  • More pallets.
  • More storage.
  • More handling.
  • More scheduling complexity.
  • More opportunity for jobs to be damaged, misplaced or delayed.

Sometimes the most efficient thing a machine can do is wait. What matters is not whether every machine is busy. What matters is whether the factory is producing the maximum number of completed jobs reliably.

Bottlenecks aren’t always machines

Another lesson we’ve learned is that the constraint isn’t necessarily physical equipment.

It can be a process. For example:

  • artwork waiting to be checked
  • an estimate waiting to be produced
  • production information being entered twice
  • somebody manually deciding which machine should run a job
  • paperwork waiting to move between departments
  • a customer query waiting for a response
  • finished work waiting to be booked onto a carrier

None of those things appears on a machine specification sheet, yet any one of them can slow production. This is why manufacturing efficiency and automation are increasingly inseparable.

We have spent years looking for opportunities to remove unnecessary administration, reduce re-keying, automate routine decisions and connect different parts of our workflow; not because computers are inherently better than people. But because people are far more valuable when they are dealing with exceptions, solving problems and improving processes than when they are repeatedly transferring the same information from one place to another.

Resilience matters too

There is another dimension to efficiency that is easy to overlook: resilience. Theoretically, a factory with one machine running at 100% utilisation might look extraordinarily efficient. Until that machine breaks down - then output becomes zero.

For a trade printer, reliability matters enormously because our customers are often relying on us as part of their own supply chain. This means we have to think not only about capacity, but also about what happens when things go wrong.

  • Where are we overly dependent on one piece of equipment?
  • Where do we have alternative routes?
  • Where would a breakdown immediately affect customers?

Sometimes investing in additional capacity isn’t about producing more. It’s about ensuring we can continue producing, and quite often, as we discovered with our second booklet-making line, the additional resilience eventually becomes additional productive capacity anyway.

What customers actually experience

Customers rarely care how many sheets per hour a printing press can produce – nor should they. What customers experience is much simpler:

  • Did their job arrive when expected?
  • Was the quality right?
  • Was communication clear?
  • Could we cope when they suddenly needed something urgently?
  • Could we accommodate an unusually large order?
  • Could they rely on us?

Those outcomes depend upon the whole manufacturing system. That is why our definition of efficiency has gradually changed. Efficiency isn’t simply: How quickly can we print this? It is:

How little unnecessary time can this job spend between entering our system and leaving the factory completed? And that includes printing. But it also includes estimating, artwork, scheduling, finishing, packing, dispatch, software, automation and people.

The modern print factory is a connected system

This is increasingly where modern print manufacturing is heading. The companies that succeed won’t necessarily be those owning the fastest individual machine. In fact, most modern equipment is already extremely productive.

The bigger opportunities increasingly exist between the machines:

  • How quickly information moves
  • How effectively jobs are scheduled
  • How little manual intervention is needed
  • How easily production can switch between alternative equipment
  • How quickly problems become visible
  • How effectively capacity is balanced
  • And how little time a customer's job spends doing nothing

Our new Ryobi is going to make an enormous difference to Flexpress, but its real value won’t ultimately be measured by the number of sheets it can print in an hour. It will be measured by how effectively we integrate that capacity with everything around it, because the fastest machine in the factory isn’t always the answer.

The fastest factory is the one where the whole system works together.

Next article →The hardest job I’ve had at Flexpress: making myself less important
← All articles in this issue

Article details

Manufacturing Efficiency

Part of the Flexpress Insights Autumn 2026 Newsletter.

Production PlanningFinishingWorkflowInvestment

In this issue

  • Manufacturing EfficiencyThe fastest machine in the factory isn’t always the answer
  • Succession PlanningThe hardest job I’ve had at Flexpress: making myself less important
  • Trade Print AutomationAutomation isn’t about losing people
  • Modern Print BusinessWe stopped trying to be a one-stop print shop
  • Responsible PrintThe greenest sheet of paper is the one you don’t waste

On this page

  • Every factory has a constraint
  • Why finishing matters so much
  • Capacity without flow can create a bigger problem
  • A machine standing still isn’t always a problem
  • Bottlenecks aren’t always machines
  • Resilience matters too
  • What customers actually experience
  • The modern print factory is a connected system

Flexpress positioning

Trade Print. Done Properly.

Good Business Done Responsibly.

  1. Insights
  2. Autumn 2026 Newsletter
  3. The hardest job I’ve had at Flexpress: making myself less important
Succession PlanningNewsletter

The hardest job I’ve had at Flexpress: making myself less important

What succession planning has taught us about trapped knowledge, letting go of decisions and handing over a culture.

Steve WenlockAutumn 2026 Newsletter7 min read
Photo: Lennert Naessens / Unsplash

There’s something slightly contradictory about building a business. For years, your usefulness is measured by how much people need you. Customers ask for you. Employees come to you with problems. Suppliers want your decision. The bank wants your signature. When something unusual happens, everyone knows who to ask.

And if you’ve built the company from the beginning, that feels perfectly natural. You probably know more about the business than anybody else. You know why certain decisions were made. You remember the customers you lost and why you lost them. You know which investments worked, which didn’t and which almost brought the company unstuck.

In fact, you develop instincts that are difficult to explain because they’ve been built from thousands of decisions over decades.

For a long time, being indispensable can therefore feel like evidence that you’re doing your job well.

Then one day you realise something rather uncomfortable:

If the business cannot operate properly without you, your indispensability is also one of its weaknesses.

That has probably been one of the biggest lessons I’ve learned through succession planning at Flexpress. Selling the business isn’t the same as handing it over. When succession planning is discussed, attention naturally focuses on the transaction. Things like:

  • Who is going to own the company?
  • What is it worth?
  • How will it be paid for?
  • When does ownership transfer?

All perfectly reasonable questions, but I’ve increasingly come to believe that the financial transaction is only one part of succession. You can transfer shares relatively easily. Transferring 35-plus years of accumulated knowledge is rather more complicated because a founder carries around an extraordinary amount of undocumented information. Some of it is factual. Some is judgement. Some is instinct. And some is so embedded that you don’t even realise you know it until somebody else asks the question:

  • Why do we deal with this supplier?
  • Why don’t we produce that product?
  • Why do we prioritise this type of work?
  • What makes a good investment?
  • When should we compromise for a customer?
  • When should we politely say no?
  • What sort of behaviour is acceptable inside the company?
  • What do we mean when we say we want to do business properly?

There is rarely a folder containing all those answers. Quite often, the folder is the founder and that is not a particularly good long-term system!

Knowledge trapped in somebody’s head is a business risk

Businesses often think about single points of failure in manufacturing. We understand the danger of depending upon one printing press, one finishing machine or one server. Yet we don’t always apply the same thinking to people.

If one person holds the knowledge required to make dozens of important decisions, that person is also a single point of failure. It doesn’t matter whether that person is the founder, production manager, estimator or machine operator. The principle is the same.

At Flexpress, this has made me think much more seriously about the difference between knowledge and systems. A strong business should not depend upon somebody remembering everything. Instead, and where possible, the knowledge needs to become part of the organisation. Sometimes that means software. Sometimes it means documented processes. Sometimes training. Sometimes clearer responsibilities and sometimes it simply means explaining why we do something rather than telling somebody what to do. This last part is particularly important.

Procedures aren’t enough

You could try to document every decision I’ve made over the years, but, I’m not sure anybody would want to read it! And even if they did, it wouldn’t solve the problem because businesses change, customers change, technology changes and markets change.

The right answer today might be completely wrong five years from now.

So, succession cannot simply mean writing an enormous operating manual describing how the founder used to do everything. What matters more is transferring the thinking behind the decisions.

The principles.

For us, some of those are becoming what we’ve started calling the Wenlock Philosophy which sounds rather grander than it really is. It’s simply an attempt to make some of the values and lessons accumulated over the years explicit.

Things such as:

  • Do what you say you’re going to do
  • Treat people fairly
  • Don’t hide problems
  • Invest where the real constraint is
  • Think about the long-term consequences of short-term decisions
  • Make it easier for customers to do business with us
  • Automate repetitive work but use people where judgement matters
  • Take responsibility when we get something wrong

None of these ideas are particularly revolutionary. But together, they influence hundreds of small decisions. If those principles survive, the exact decisions don’t necessarily need to be mine.

Letting other people make decisions

That brings us to another difficult part of succession: you have to allow other people to do things differently, which is easier to write than it is to practise.

When you’ve spent decades making decisions, you develop a very clear idea of how things should be done. Then somebody else takes responsibility and chooses another route. Your immediate reaction can be: "I wouldn’t have done it like that." Sometimes they will be wrong. Sometimes you will be right. But sometimes — and this is perhaps harder for a founder to admit — their way will be better.

The challenge is deciding when to intervene and when to allow somebody to learn. If every decision still needs the founder’s approval, nothing has really changed. You’ve transferred responsibility on paper while retaining it in practice and that isn’t succession. It’s delegation with a very long piece of string attached.

The next generation shouldn’t become a copy of the last one

There is another trap. Succession planning can become an attempt to recreate the founder. I don’t think that's healthy either. The business the next generation inherits is not the business I started.

When Flexpress began, there was no meaningful internet, no online print ordering, no automated pre-flight, no cloud software, no AI and certainly nothing resembling the level of production automation we use today.

The people running Flexpress in the future will face challenges I cannot predict.

The team, therefore, need to develop their own judgement. My job isn't to make sure they make exactly the decisions I would make. It is to ensure they understand enough about why the business exists, what it stands for and what we’ve learned along the way, that they can make better decisions of their own.

There’s a substantial difference between these two things.

Systems give people freedom

Interestingly, this is also why I’ve become increasingly interested in automation and systems.

At first glance, automation and succession planning don't seem particularly connected, but I think they are.

  • Every routine decision that can be sensibly automated is one fewer decision somebody has to remember how to make.
  • Every process that becomes visible in software is one less process dependent upon somebody knowing where a piece of paper is.
  • Every workflow that automatically moves information between departments is one less opportunity for knowledge to become trapped with one individual.

Good systems don’t remove the need for good people. They give good people more freedom to concentrate on the things that actually require judgement and that makes any company more scalable. It also makes it less dependent upon any individual - including me!

Culture may be the hardest thing to hand over

Processes can be documented, machines come with manuals, software can contain rules but culture is much harder. Every company develops unwritten standards such as how to speak to customers, how managers treat employees, whether bad news travels upwards quickly or gets hidden, whether people help each other when another department is struggling, whether the instinct when something goes wrong is to blame somebody or solve the problem.

For many years, founders influence those things simply through their presence. People know what will and won't be accepted.

Succession means finding ways for those standards to survive when the founder is no longer in the building every day and this is the one reason I’ve become increasingly interested in internal training and communicating our philosophy more deliberately.

Culture shouldn't depend upon folklore. If something matters, we probably need to explain why it matters.

What does success eventually look like?

There is a strange irony in all this. For most of my career, success meant Flexpress needing more from me: More customers. More investment. More decisions. More problems to solve.

Now, in some ways, the measure is reversing:

  • Can somebody else make that decision?
  • Can the system handle that automatically?
  • Does the team understand why we do this?
  • Could Flexpress operate perfectly well if I wasn't here tomorrow?

Those questions would once have made me uncomfortable, but increasingly, they feel like the right ones. Because succession planning isn't really about retiring. And it certainly isn't just about selling a company. It's about turning something that began as one person's enterprise into an organisation that has a life of its own.

I’ve spent much of my working life trying to make Flexpress bigger, stronger and better.

Perhaps the final stage of that journey is rather different.

Building a Flexpress that no longer depends upon the person who built it.

← Previous articleThe fastest machine in the factory isn’t always the answerNext article →Automation isn’t about losing people
← All articles in this issue

Article details

Succession Planning

Part of the Flexpress Insights Autumn 2026 Newsletter.

LeadershipCultureSystems

In this issue

  • Manufacturing EfficiencyThe fastest machine in the factory isn’t always the answer
  • Succession PlanningThe hardest job I’ve had at Flexpress: making myself less important
  • Trade Print AutomationAutomation isn’t about losing people
  • Modern Print BusinessWe stopped trying to be a one-stop print shop
  • Responsible PrintThe greenest sheet of paper is the one you don’t waste

On this page

  • Knowledge trapped in somebody’s head is a business risk
  • Procedures aren’t enough
  • Letting other people make decisions
  • The next generation shouldn’t become a copy of the last one
  • Systems give people freedom
  • Culture may be the hardest thing to hand over
  • What does success eventually look like?

Flexpress positioning

Trade Print. Done Properly.

Good Business Done Responsibly.

  1. Insights
  2. Autumn 2026 Newsletter
  3. Automation isn’t about losing people
Trade Print AutomationNewsletter

Automation isn’t about losing people

Automate the routine, escalate the unusual: how automation gives our people time back for work that needs judgement.

Steve WenlockAutumn 2026 Newsletter7 min read
Photo: Homa Appliances / Unsplash

The word “automation” has a slightly uncomfortable reputation. Mention it in a factory and it can quickly become associated with one idea: fewer people. A machine replaces an operator. Software replaces an administrator. Artificial intelligence replaces a decision.

From a purely financial viewpoint, that can make automation sound quite simple. Find something a person currently does, find a cheaper way of doing it automatically, and remove the labour cost.

This has never really been the most interesting opportunity for us at Flexpress. Our starting question is different: What work are our people doing that we really shouldn’t be asking them to do at all?

That distinction matters.

People are expensive. Their wasted time is even more expensive

People are one of the most valuable resources in any business which is why it makes so little sense to waste their time. Yet every business does it!

Information is typed into one system and then typed into another. Someone manually checks something a computer could check instantly. Paperwork moves between departments. An employee spends ten minutes searching for information that should already be visible. Another waits for somebody else to approve a routine decision. Someone sends an email purely because two systems don’t communicate with each other.

None of those tasks is particularly difficult and that’s part of the problem. They consume time without making good use of the person doing them.

If you repeat small inefficiencies hundreds of times every day, they become a substantial drain on the business and automation gives us the opportunity to remove them.

Enter information once

One of our simplest principles is that information should ideally only be entered once. If a customer has already given us their delivery address, quantity, specification and artwork, why should somebody inside Flexpress have to enter that information again? And then perhaps again somewhere else?

Every manual re-entry creates three problems:

  • It takes time
  • It introduces delay
  • And it creates another opportunity for error

The same principle applies throughout the workflow: An order should move from the website into production → Production information should become dispatch information → Dispatch information should become invoicing information. Wherever possible, the systems should talk to each other.

The employee should only need to intervene when something genuinely requires human judgement.

That might sound like a small change, but across thousands of jobs, it is anything but small.

Automate the routine. Escalate the unusual

This is probably the automation principle I like most. Most businesses contain a huge number of predictable situations. If X happens, do Y. If the artwork meets these criteria, approve it. If the job has reached this stage, move it to the next one. If the carrier has collected the parcel, update the customer. If payment has been received, release the order.

Computers are extremely good at consistent, repetitive rules, but people are not. People get distracted. They get interrupted. They have busy days. They make mistakes. But people are far better than computers when something unusual happens such as:

  • A customer has an odd requirement
  • Artwork is technically wrong but might still be usable
  • A delivery has gone missing
  • Production needs reorganising because a machine has failed
  • A long-standing customer needs something urgently

Those are judgement calls and that’s where we want people spending their time. The ideal system therefore handles the routine automatically and makes the exceptions highly visible.

Automation should reduce the number of decisions people have to make, not remove their ability to make decisions when they matter.

The purpose isn’t fewer people

This is where automation becomes misunderstood. If a process that previously required ten minutes of somebody’s time now happens automatically, it’s tempting to treat those ten minutes purely as a labour saving. But there is another possibility: give those ten minutes back to the employee! Let them solve another problem, improve another process, answer a customer more quickly, help somebody in production, or identify something that could be done better.

Multiply that across the business and you start to create substantial additional capacity without necessarily adding more people which is much closer to our experience at Flexpress.

Since Covid, we’ve substantially increased turnover without increasing headcount at anything like the same rate. In fact, we still have fewer employees than we did pre-pandemic with twice the turnover!

This hasn’t happened because the people became less important. It has happened partly because we’ve tried to remove more of the unnecessary work surrounding them.

Manufacturing contains more administration than you might think

When people picture automation in printing, they often imagine physical machinery. Robots. Automatic feeders. High-speed presses. Automatic finishing systems – and these things matter enormously.

But some of the biggest opportunities exist before the sheet even reaches the press:

  • Estimating
  • Ordering
  • Artwork checking
  • Scheduling
  • Job tickets
  • Production instructions
  • Stock allocation
  • Dispatch
  • Invoicing
  • Customer updates

Each one of which contains information, and every time information has to be manually moved, checked, interpreted or re-entered, it creates friction.

The modern print factory is therefore as much an information system as it is a collection of machines.

The physical product may be paper and ink, but much of the productivity improvement comes from moving the information around it more efficiently.

Automation also improves consistency

There’s another benefit that is sometimes overlooked. People do not perform repetitive tasks consistently. This isn’t criticism, it’s human nature.

Give someone the same dull task five hundred times and eventually something will be missed. Software doesn’t get bored. A properly designed automated process applies the same rule every time which can improve quality as well as productivity:

  • Artwork checks happen consistently
  • Information appears in the right place
  • Customers receive updates at the right stage
  • Jobs aren’t dependent upon somebody remembering the next action

And if something goes outside the rules, the system can flag it for attention. It’s a powerful combination: machines handle consistency; people handle judgement.

The best automation is often invisible

Some of the most valuable automation in a business is almost unnoticeable.

  1. A customer places an order
  2. The artwork is checked
  3. The production information appears
  4. The job progresses
  5. The dispatch label is generated
  6. The invoice is created
  7. The customer receives an update

Nobody necessarily thinks, “That was automation.” It simply feels easier, and that is probably the best test of a good system. The technology disappears into the process. The customer gets a smoother experience. The employee has fewer repetitive tasks. The company becomes easier to run.

Automation creates resilience too

Automation isn’t only about productivity. It can also reduce dependency on particular individuals.

If a process only works because one employee knows what happens next, that knowledge is fragile.

If the workflow itself contains the logic, the business becomes more resilient. This doesn’t mean replacing expertise. It means making sure routine knowledge isn’t trapped inside somebody’s head.

This becomes particularly important as a business grows.

Processes that worked when ten people knew everything about every job become much harder to manage at greater scale. Systems allow the company to grow without requiring everybody to carry ever-increasing amounts of information.

The danger of automating the wrong thing

Of course, automation isn’t automatically good. You can automate a bad process and make an unnecessary task happen faster. You can create systems so rigid that customers become frustrated.

And you can remove human judgement from situations where judgement is exactly what is needed.

So, the first question shouldn’t be: “Can we automate this?” It should be: “Should this task exist at all?”

If the answer is no, remove it. If the answer is yes but it is predictable and repetitive, automate it.

If the answer is yes and it requires judgement, give it to a person. This simple hierarchy can prevent an enormous amount of pointless complexity.

What does the modern print business look like?

Automation will increasingly separate modern print businesses from traditional ones. Not because one factory will contain people and another won’t, but because the better automated business will use its people differently:

  • Fewer repetitive tasks.
  • Fewer unnecessary handovers.
  • Less duplication.
  • Less searching.
  • Less waiting.
  • More visibility.
  • More time for problem solving.
  • More time for customers.
  • More time for improvement.

For us, there is the real opportunity. We don’t want to build a business where people are unnecessary. We want to build a business where unnecessary work is unnecessary and that’s a substantial difference.

Automation isn’t about removing people from Flexpress. It’s about making sure the people we have spend as much of their time as possible doing work that actually needs a person.

← Previous articleThe hardest job I’ve had at Flexpress: making myself less importantNext article →We stopped trying to be a one-stop print shop
← All articles in this issue

Article details

Trade Print Automation

Part of the Flexpress Insights Autumn 2026 Newsletter.

AutomationWorkflowPeople

In this issue

  • Manufacturing EfficiencyThe fastest machine in the factory isn’t always the answer
  • Succession PlanningThe hardest job I’ve had at Flexpress: making myself less important
  • Trade Print AutomationAutomation isn’t about losing people
  • Modern Print BusinessWe stopped trying to be a one-stop print shop
  • Responsible PrintThe greenest sheet of paper is the one you don’t waste

On this page

  • People are expensive. Their wasted time is even more expensive
  • Enter information once
  • Automate the routine. Escalate the unusual
  • The purpose isn’t fewer people
  • Manufacturing contains more administration than you might think
  • Automation also improves consistency
  • The best automation is often invisible
  • Automation creates resilience too
  • The danger of automating the wrong thing
  • What does the modern print business look like?

Flexpress positioning

Trade Print. Done Properly.

Good Business Done Responsibly.

  1. Insights
  2. Autumn 2026 Newsletter
  3. We stopped trying to be a one-stop print shop
Modern Print BusinessNewsletter

We stopped trying to be a one-stop print shop

Why we chose to specialise, and how focusing on the right print makes standardisation, automation and investment clearer.

Steve WenlockAutumn 2026 Newsletter7 min read
Photo: Julian Hochgesang / Unsplash

For a long time, I thought the ideal printing company was a one-stop shop. Whatever the customer wanted, we should be able to produce it.

Business cards? Yes.

Booklets? Of course.

Foamex Boards, Roller banners, Labels, Boxes. Why not?

The logic seems perfectly reasonable. The more products you can offer, the more opportunities you have to sell something. And if a customer already trusts you with one type of print, surely it makes sense to provide everything else they might need too?

For years, that was largely how I thought about growing Flexpress, but eventually, I began to realise that there was another side to the equation.

For every new product we added also added complexity, and complexity has a cost. More products don’t automatically mean more profit. Turnover is seductive. A job comes in worth £5,000 and naturally it feels like £5,000 worth of good news.

But not all turnover is equal. Some work flows smoothly through the factory. The estimating is straightforward, the materials are familiar, the job fits the equipment, the operators know exactly how to produce it, the finishing route is predictable. And the whole thing moves through production with relatively little intervention.

Other jobs can look attractive on paper but consume a disproportionate amount of time. They need specialist estimating, unusual materials, different suppliers, manual production decisions, extra handling, outside finishing, more customer communication and more opportunities for something unexpected to happen.

The turnover might be identical, but the value to the business can be completely different.

That was an important lesson.

The objective isn’t simply to sell more print. It’s to sell more of the right print.

Complexity hides everywhere

One of the problems with a very broad product range is that the complexity isn’t always immediately visible. Suppose you introduce one additional product. That sounds simple enough. But that product might need:

  • another material
  • another supplier
  • a different estimating method
  • different artwork rules
  • another production route
  • specialist finishing
  • different packaging
  • different pricing logic
  • and somebody who understands what to do when it doesn’t fit the standard process.

Do that repeatedly and eventually you create a business containing hundreds of exceptions. The factory might still appear to be producing print. However, behind the scenes, people are constantly making decisions:

  • Where should this job go?
  • Can we produce this size?
  • Which machine should run it?
  • Who knows how to finish it?
  • Have we ordered the right material?
  • What did we charge last time?

Every exception requires somebody to think – and thinking takes time.

Standardisation changes everything

The more we began to specialise, the more we saw another benefit: standardisation becomes much easier. If you repeatedly manufacture similar products, you can begin designing the whole process around them.

  • You know which materials you use
  • You know the most efficient sheet sizes
  • You understand the common finishing routes
  • You can build pricing around real production data
  • You can automate artwork checks
  • You can create standard workflows
  • You can invest in equipment specifically because it improves those products

The question moves from: “Can we make this?” to: “How do we make this exceptionally efficiently?” Which is a much more interesting question.

Specialisation makes automation possible

This has become particularly important as Flexpress has invested more heavily in automation. Automation loves predictability. If every order is different, contains exceptions and requires somebody to decide what happens next, automation becomes extremely difficult.

If jobs follow repeatable rules, much more can happen automatically. An online order can become a production job → Artwork can be checked against known specifications → The job can be routed appropriately → Production information can follow it → Dispatch and invoicing can happen with far less manual intervention.

The more standard the underlying product, the easier it becomes to remove unnecessary administration around it. This is one of the reasons specialisation and automation have increasingly gone hand in hand for us.

Investment becomes clearer too

Specialisation also changes how you invest. If you manufacture almost everything, practically any new machine can be justified. There will always be some work that could use it, but that doesn’t necessarily make it a good investment.

Once you know the type of work you actively want more of, capital investment becomes much more focused:

  • Does this machine increase capacity in one of our core products?
  • Does it remove a bottleneck?
  • Does it reduce set-up time?
  • Does it allow us to produce that work more competitively?
  • Does it improve resilience?

These are much more useful questions than simply asking whether a machine gives us another capability.

We’ve seen this repeatedly at Flexpress. Our investments in booklet-making, digital production, finishing and now our new Ryobi press are increasingly designed around the work we know fits our manufacturing model.

We’re not trying to collect machinery. We’re trying to build a better production system.

Saying no can be commercially sensible

This is perhaps one of the hardest lessons for any business owner. Turning work away feels wrong; especially when you’ve spent years trying to grow. But accepting every job can sometimes damage the customers whose work you are best equipped to produce.

An unusual job enters the factory → It needs special attention → Production has to change → People get pulled away from other work → A machine needs an unfamiliar set-up. Suddenly ten normal jobs are waiting while one exceptional job works its way through the system.

The unusual job may still be profitable, but its real cost is larger than the figure on the job sheet.

This doesn't mean we never take on bespoke work. We do.

Good customers occasionally need something unusual, and part of good service is trying to help.

But there is a difference between making an exception for a customer and building your entire business model around exceptions. We’ve just become much more conscious of that distinction.

Specialisation doesn’t necessarily mean a narrower customer offer

There is an apparent contradiction here. Customers often like convenience. They don't necessarily want to manage ten different suppliers. So how do you specialise without becoming less useful?

Maybe the answer is to distinguish between what you sell and what you manufacture exceptionally well. A business can remain helpful. It can advise customers. It can source something sensible when appropriate. It can partner with other specialists. But it doesn't necessarily need to own every manufacturing process itself.

This is a very different mindset from believing every pound of turnover must physically pass through your own machinery. Sometimes the best answer for both customer and supplier is to understand where each business genuinely excels.

The internet changed this too

Years ago, geography naturally encouraged printers to be generalists. A local customer wanted a range of products and expected their local printer to provide them. The internet changed that.

Customers can now buy from specialists anywhere which creates competition, but it also creates opportunity.

A printer no longer needs every company within twenty miles to buy everything from them.

It can become exceptionally good at a narrower group of products and sell those products much more widely.

This fits particularly well with trade printing. Our customers don’t necessarily need us to produce every conceivable item. They need us to be extremely good at the products they choose to trust us with which is a different proposition.

Being a specialist doesn’t mean standing still

There’s also a danger of interpreting specialisation as refusing to change. That isn’t the idea.

Markets move. Technology changes. New products become viable. Existing products decline. A specialist still has to evolve.

But ideally the decision to add something new should come from a clear strategic reason rather than:

“We’ve been asked for one, so perhaps we should start selling them.”

  • Does it fit our customers?
  • Does it fit our equipment?
  • Can we automate it?
  • Can we manufacture it efficiently?
  • Does it complement what we already do?
  • Could it become meaningful in scale?

Those questions matter, because every new product brings opportunity, but it also brings complexity.

From printer to manufacturer

Perhaps this is the biggest change in our thinking. For many years, I primarily thought of Flexpress as a printing company. Increasingly, I think of it as a manufacturing business that happens to manufacture print. It’s a distinction that changes your perspective.

A printer asks: “Can we print this?” A manufacturer asks: “Can we produce this repeatedly, efficiently, reliably and profitably?” They are not the same question. And increasingly, that second question shapes what we do.

Our aim is no longer to have the longest possible list of products. It is to build a highly automated, efficient manufacturing system around the products where we believe we can genuinely add value.

We stopped trying to be a one-stop print shop. Not because we became less ambitious.

Because we became much clearer about what we wanted to be good at.

← Previous articleAutomation isn’t about losing peopleNext article →The greenest sheet of paper is the one you don’t waste
← All articles in this issue

Article details

Modern Print Business

Part of the Flexpress Insights Autumn 2026 Newsletter.

SpecialisationStandardisationInvestment

In this issue

  • Manufacturing EfficiencyThe fastest machine in the factory isn’t always the answer
  • Succession PlanningThe hardest job I’ve had at Flexpress: making myself less important
  • Trade Print AutomationAutomation isn’t about losing people
  • Modern Print BusinessWe stopped trying to be a one-stop print shop
  • Responsible PrintThe greenest sheet of paper is the one you don’t waste

On this page

  • Complexity hides everywhere
  • Standardisation changes everything
  • Specialisation makes automation possible
  • Investment becomes clearer too
  • Saying no can be commercially sensible
  • Specialisation doesn’t necessarily mean a narrower customer offer
  • The internet changed this too
  • Being a specialist doesn’t mean standing still
  • “We’ve been asked for one, so perhaps we should start selling them.”
  • From printer to manufacturer

Flexpress positioning

Trade Print. Done Properly.

Good Business Done Responsibly.

  1. Insights
  2. Autumn 2026 Newsletter
  3. The greenest sheet of paper is the one you don’t waste
Responsible PrintNewsletter

The greenest sheet of paper is the one you don’t waste

Why cutting waste in the process matters as much as the paper you choose, and how efficiency and responsibility go hand in hand.

Steve WenlockAutumn 2026 Newsletter6 min read
Photo: Mahen Rin / Unsplash

When people talk about sustainable print, the conversation often starts with materials. Is the paper recycled? Is it FSC certified? Where did the fibre come from? Can it be recycled again? And all of those are important questions.

But there is another, much simpler point that can easily be overlooked: The greenest sheet of paper is the one you don’t waste.

This might sound obvious, but it has some important implications because every wasted sheet of paper has already consumed resources before it reaches the recycling bin. It has been manufactured, transported, stored, handled, printed and often finished before somebody decides it cannot be used.

So, whilst material choice matters, one of the most responsible things any printer can do is reduce the amount of material that never becomes a finished product in the first place.

Waste starts long before the bin

In print manufacturing, waste can appear in lots of places:

  • The make-ready waste while a press reaches the correct colour and registration.
  • Offcuts created by inefficient impositions.
  • Sheets lost because artwork is wrong.
  • Reprints caused by incorrect information.
  • Overruns, miscounts and jobs produced to the wrong specification.
  • And there are perfectly good sheets that become waste simply because another part of the process has failed.

None of these problems are solved by buying a more sustainable paper. They are solved by running a better process and this is why, for us, responsible print and manufacturing efficiency are closely linked. A more efficient factory should not only produce work faster and more reliably, but it should also waste less.

Modern equipment helps

One of the clearest examples is press make-ready. Older equipment could require significant quantities of paper before colour and registration were right, but modern presses are much more controlled.

Automation, closed-loop colour systems, better register control, sheet scanning and more accurate presets all help reduce the number of sheets needed before saleable production begins.

If you save fifty sheets on one job, it doesn’t sound dramatic, but save fifty sheets across hundreds or thousands of jobs and suddenly it matters a lot, and this is the reality of manufacturing improvement; rarely one enormous breakthrough, but lots of small savings repeated consistently.

Better information reduces physical waste

Some of the most important waste reduction actually happens before paper ever reaches a machine:

  • If artwork is checked properly before production, fewer jobs need to be stopped or reprinted.
  • If specifications flow accurately from order to production, there is less chance of producing the wrong size, quantity, pagination or finish.
  • If information only needs to be entered once, there are fewer opportunities for somebody to type it incorrectly.

This is one reason at Flexpress, we invest so heavily in automation. People often think of automation purely in terms of labour saving, but good automation also improves consistency, and in turn, consistency reduces waste. After all, a file rejected automatically before production is far better than a job rejected after thousands of sheets have already been printed.

Standardisation matters too

Specialisation has an environmental benefit as well. The more predictable the work, the easier it becomes to optimise it.

  • Standard sheet sizes.
  • Known finishing routes.
  • Regular materials.
  • Consistent impositions.
  • Repeatable production methods.

All of these make planning easier, and better planning means fewer surprises. When every job is a one-off, waste becomes harder to control because every process has to be worked out again, but when production follows established routes, the opportunity for error reduces.

This is one of the reasons we no longer believe a print business necessarily becomes better simply by offering more and more products. Sometimes, doing fewer things, but doing them exceptionally well, creates a more efficient and more responsible manufacturing model.

Paper is only part of the waste

It is also easy to focus on the sheet and forget everything else attached to it, but a wasted print job can also mean wasted:

  • ink
  • coatings
  • energy
  • machine time
  • plates
  • finishing materials
  • packaging
  • labour
  • transport

And if the job has to be produced again, many of those inputs are consumed twice. Exactly why waste reduction has a compounding effect. Preventing one mistake can save far more than the value of the paper itself.

Waste is usually a symptom

And this is probably the more important lesson. Waste is often not the real problem, but the evidence of another problem.

  • Poor planning
  • Weak artwork checks
  • Bad communication
  • Unclear specifications
  • Inefficient layouts
  • Unnecessary manual handling
  • A process that depends too heavily on memory
  • Or a bottleneck that creates pressure elsewhere in production

Simply recycling the waste deals with the consequence. But wouldn’t a better question be: Why did we create the waste in the first place? This mindset is much more useful.

Responsible print should be measurable

There is a danger that environmental language becomes vague. Terms such as “green”, “eco-friendly” and “sustainable” can sound good without explaining much. We prefer to think in more practical terms:

  • Can we reduce make-ready sheets?
  • Can we reduce reprints?
  • Can we optimise paper use?
  • Can we improve first-time-right production?
  • Can we reduce unnecessary transport?
  • Can we remove unnecessary handling?
  • Can we use better data to plan production?

These are measurable improvements. And if they reduce waste, they are both environmentally and commercially valuable, which matters because the strongest sustainability improvements are usually the ones that make business sense too.

If reducing waste saves money, improves throughput and reduces environmental impact at the same time, it is far more likely to become a permanent part of the way the business operates.

Efficiency and responsibility are not opposites

Sometimes environmental improvement is presented as something that costs more, and sometimes it does. But waste reduction is one of those areas where responsibility and efficiency are usually aligned.

Using less paper to produce the same saleable output is better environmentally, but is also better commercially. Avoiding a reprint saves material, but also saves machine capacity. Reducing a production error saves energy, but also protects a delivery deadline. Better planning reduces waste, but also improves flow.

This is why we increasingly see responsible print as part of good manufacturing rather than as a separate initiative. The same disciplines that make a factory more efficient often make it more responsible.

There will always be some waste

Of course, printing is manufacturing and there will always be unavoidable spoilage. Machines need setting, sheets get damaged, processes are not perfect.

The aim is not to pretend that waste can somehow be eliminated completely. It would be unrealistic. The aim is to understand it, reduce it and keep challenging it:

  • If one job needs 200 make-ready sheets today, could it need 150 tomorrow?
  • If an artwork error causes regular reprints, can the check happen earlier?
  • If one imposition creates excessive trim waste, is there a better way to plan it?
  • If a process depends on someone remembering a detail, can that detail be built into the system instead?

These are not glamorous questions, but they are the ones that make manufacturing better.

The best waste is the waste you never create

Recycling matters. Responsible sourcing matters. Certified materials matter. But none of them should distract from a simpler principle: the most efficient sheet of paper is one that becomes a finished product first time. The most responsible reprint is the one that never needs to happen. The best offcut is the one designed out of the process. And the greenest sheet of paper is still the one you don’t waste.

For us, that is what responsible print increasingly means. Not simply choosing better materials, but using every material more intelligently.

← Previous articleWe stopped trying to be a one-stop print shop
← All articles in this issue

Article details

Responsible Print

Part of the Flexpress Insights Autumn 2026 Newsletter.

Waste ReductionSustainabilityMake-readyEfficiency

In this issue

  • Manufacturing EfficiencyThe fastest machine in the factory isn’t always the answer
  • Succession PlanningThe hardest job I’ve had at Flexpress: making myself less important
  • Trade Print AutomationAutomation isn’t about losing people
  • Modern Print BusinessWe stopped trying to be a one-stop print shop
  • Responsible PrintThe greenest sheet of paper is the one you don’t waste

On this page

  • Waste starts long before the bin
  • Modern equipment helps
  • Better information reduces physical waste
  • Standardisation matters too
  • Paper is only part of the waste
  • Waste is usually a symptom
  • Responsible print should be measurable
  • Efficiency and responsibility are not opposites
  • There will always be some waste
  • The best waste is the waste you never create

Flexpress positioning

Trade Print. Done Properly.

Good Business Done Responsibly.

Trade Print. Done Properly.Flexpress Insights · Autumn 2026 Newsletter